5V 2*18650 Lithium Battery Charging UPS Uninterrupted Protection Integrated Board Boost Module With Battery Holder
103
Direct purchase from the factory 
保證安全結帳
免費禮物
運送政策
退貨政策免費禮物
歡迎來到Roymall，您的專業購買高級百貨禮物的網站。我們非常重視並感謝您的支持，並希望通過為您的購買增添額外的驚喜來表達我們的感激之情。當您與我們一起購物時，您不僅可以享受提升生活品質的高品質產品，還可以在每次訂單中獲得獨家免費禮物。 準備好探索我們的收藏並找到您的完美禮物了嗎？瀏覽我們的高級百貨商品選擇，下訂單，並期待您的免費禮物與您的購買一起到來。運送政策
我們將努力在收到您的訂單後將商品安全送達您手中。運送詳情將在您的確認郵件中提供。在大多數情況下，訂單將在2天內處理。在特殊情況下，可能會延遲如下：當您在週六、週日或公共假期下訂單時，將延遲2天。通常需要5-7個工作日（週一至週五），不受航班延誤或其他環境因素影響。由於我們的運送服務是全球性的，運送時間將取決於您的位置，因此可能需要幾天時間，如果您位於偏遠地區或國家，請耐心等待。1. 退貨與換貨政策
我們僅接受在roymall.com購買的商品。如果您從我們的本地分銷商或其他零售商處購買，則無法在我們這裡退貨。 最終銷售商品或免費禮物不可退貨。要符合退貨條件，您的商品必須未使用且與收到時的狀態相同。還必須保留原始包裝。收到我們的退貨指示後，請將退貨商品打包並將包裹送至當地郵局或其他快遞服務。我們將在收到退貨商品後3-5個工作日內處理您的退貨或換貨。退款將自動處理並記入您的原始付款方式。如果商品是根據訂製生產的，包括訂製尺寸、訂製顏色或訂製印刷，則不可退貨或換貨。需要更多幫助，請聯繫我們。 service@roymall.com 或 Whatsapp: +8619359849471
2.退款政策
在我們收到並確認退貨包裹後，您將獲得全額退款或100%商店信用。退款將自動處理並記入您的原始付款方式。 請注意，運費及任何關稅或費用不可退款。包裹發貨後，額外運費不可退款。您需負責支付這些費用，我們無法免除或退款，即使訂單被退回給我們。一旦我們收到並確認您的退貨商品，我們將向您發送電子郵件，通知您我們已收到您的退貨商品。我們還將通知您退款的批准或拒絕。如果您在退款過程中有任何問題，請聯繫我們。 service@roymall.com 或 Whatsapp: +8619359849471
Feature:
1. Boost + charge control + Lithium battery protection + UPS uninterrupted power supply, multi-function integration, easy to use, no longer trouble the intricate flying lines between the various function boards.
2. The switch can be used as a low power DC mobile power supply. It can be used as a UPS power supply and can be used as a lithium battery charger.
3. Battery box design, easy to remove and replace the battery.
4. Separate charge port, wiring can be placed in any position.
Advantage:
The power supply charges the battery one way while the other way turns on the boost output.
When the power supply is turned on, the battery can be removed at will.
When the battery is powered, the power supply can also be disconnected at any time.
If the power supply or the battery is powered at any way, it can be keep the load continuously and continuously work (UPS function).
When the UPS function is not used, charging the battery can also be used as an ordinary portable power source.
The charging power supply is connected so that the load operation does not occupy the charging current of the battery. The power supply can rapidly charge the battery while being loaded.
Note:
Charging 3/4 pin should be connected to DC5V charging, charging current 500mA max, requires that the maximum power of the charging power supply used is at least 3W higher than the load power consumption, that is, the power supply can also have enough current to the battery while carrying charging.
For example: If the load is ≤ 2W, 5V1A charging power supply can be used.
The SW switch pin can be connected in series to control the boost output circuit to turn on and off. If the switch function is not required, please short connect the SW pin to make the boost path normally open.
Output positive and negative poles 5/6 pin to connect the load, the load normal state recommends ≤ 5W, transient ≤ 8W.
when 5V output, normal load current recommend ≤ 1A, when output 6V ≤800mA, output 9V ≤500mA, output 12V ≤400mA
Lithium battery overcharge protection, over discharge protection, current limiting protection, over temperature protection, output short circuit protection. (If short-circuited due to the fault operation, enter the protection state will not be output, and the connection with 5V charging will automatically activate the reoutput.
Precautions:
There are mos and other components on the board, which can be easily damaged by the soldering iron or by static electricity. Make sure that the soldering iron used is grounded (and the grounding wire is conductive). It is best to wear anti-static gloves.
Package includes:
1 x 18650 Lithium Battery Boost Module (the battery does not includes)
